Pro-face PFXGM4201TAD Manual download pdf (Page 53)

Installation and Wiring

4 Insert the display module (with Tee, if used) into the panel hole:

Screw the nut with the socket wrench with a torque between 1.2 and 2 N•m (10.62

and 17.70 in-lb.).

5 Insert and push the rear module until it locks into place:

NOTE: Install the display module and the rear module in the orientation shown in

the illustration. If either unit is installed incorrectly, the connector may be damaged.

Step Action

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 73 74

No comments

Pro-face PFXGM4201TAD Manual Page 53